To simplify international trade in electronic devices, the IEC (International Electrotechnical Commission) created the Certified Body scheme (CB scheme). The scheme was integrated in 1985 into the IEC.
-> see Cable management
Continuous Output (effective)
In counterpoint to a temporary output (peak), the continuous output describes the performance of an electricity source that is issued continuously and without a time restriction. The continuous output is one of the general terms associated with power and hence is indicated in watts.
CrossFire refers to a function in which multiple graphics cards are operated within one computer. The technology comes from AMD and is the equivalent to NVIDIA's SLI technology. Operating two graphics cards in a CrossFire configuration provides greater graphics card performance for the computer. All current dual GPU graphics cards from AMD are based internally on CrossFire.
Combined power refers to the max. (combined) power that for example the 3.3V and 5V rails can achieve together at the same time. This applies to the 12V rails as well if these are divided into several individual rails.
CPU is a common acronym for "Central Processing Unit". The CPU described a computer's primary processor.
A condenser is a passive electrotechnical component. A non-conductive and thus isolating material (dielectric) is placed between two metal plates (or between a metal plate and an additional conductive material). Where possible, the condenser is used as an energy storage device or in combination with other components like a filter or converter.
C6/C7 refers to the deep power down mode on current Intel processors. The C6/C7 command is used to switch off all unused processor cores in their entirety. The power control unit integrated into the process controls the core activities. The power gate integrated into the mainboard switches off the individual cores as required. This creates an intelligent energy saving function.
CFM refers to Cubic Feet per Minute and is a unit of measurement for the amount of air moved by a fan. As with the European cubic meter per hour, the British CFM indicates how much air is moved in a minute by one fan. The conversion between CFM and m³/h is performed by multiplying or dividing by a factor of 1.69.
If not all cables are permanently attached to the power supply, then one speaks of a cable management system. Unused cables can be removed from the power supply using the plug/socket principle. The user can also select which cable is connected to the power supply and which are unused and can hence be removed. This keeps things more tidy in the computer casing and promotes improved air circulation.
To lay the cable connected to the power supply cleanly into the casing and prevent a tangle of cables, the cables are often coated within a tight-mesh web. Besides a nicer visual appearance, the coating also provides improved air circulation within the casing.