Maximum flexibility: The Light Base Innovation

Ingeniously simple, simply ingenious - conversion in seconds

What particularly distinguishes the Light Base are its flexible feet that can be mounted on different sides of the case. This is one of the key differences to conventional cases, which can usually only be set up in a single orientation and are often not invertable. Our solution: With Light Base, the feet are detached from the enclosure by turning 90° to the desired position, which can be on the base, the lid or even the perforated side panel.

Technical details of the Light Base

The Light Base offers a number of technical advantages that make it the perfect housing for enthusiasts. Here are a few highlights

- Fulminant ARGB-Lighting: The pre-installed up to 3 meter long RGB strip with high-quality LEDs allow the case to be individually illuminated and customized from every angle. The 900 FX variant comes with our well-known Light Wings 140 mm PWM fans and the 600 LX variant with our new Light Wings LX 120 mm PWM fans, which secure optimum airflow and leave a lasting impression.

- Large radiator compatibility: With space for up to two 420mm radiators (Light Base 900) and up to two 360 mm radiators (Light Base 600), the case offers more than enough space for powerful cooling solutions and custom builds.

- The be quiet! showcase system: No matter which orientation is desired, with the help of the innovative stand system, the Light Base offers a breathtaking view of your PC components from any angle. With its tempered glass front and side panels, the Light Base is not just an eye-catcher, it literally becomes a piece of art.

The 30-second Light Base Transformation

When designing the case, we wanted to offer our users a real and true improvement in the handling of PC cases. The inversion process for other cases is often complex and time-consuming. time-consuming. We recognized the problem and solved it directly with an innovative and intuitive solution. A 30-60 -minute inversion process becomes a 30 -second process. Here are our 5 steps:

1. Preparation: Switch off the system. Remove all external cables . Place a protective mat on your work surface and place the case on it. You do not need any tools to invert the case. Also make sure that all components are firmly installed in the case and that nothing falls out when turning. If in doubt, bulky and heavy components such as the graphics card can also be removed.

2. Detach the feet: Turn the case to a side where there are currently no feet. Remove this by turning it 90° according to the illustrated small arrows on the feet themselves.

3. Turn the case: Grasp the case at securely on 2 sides and, if necessary, turn it it, if necessary carefully so that you have access to the side on which you want to to which you want to attach the feet. Carefully put it down again.

4. Attach the feet: Look for the cut-outs for fastening on the desired side. On the Mesh- side four small rubber covers must be removed to attach the feet. Turn each foot 90° at the predetermined point on the case, again paying attention to the arrow markings on the feet themselves. This locks the foot to the case. The rotation requires only minimal force. So if something jams, it may be that the foot is not quite in the right place ,try it carefully again.

5. Connecting and disconnecting: Reconnect all disconnected cables and check that your hardware is still secure inside. Switch on the PC and start your new setup.

Conclusion

The Light Base is an case that is not only technically state-of-the-art, but also impresses with its ease of use and flexibility. The ability to invert the system in just a few seconds, coupled with a modern design and high-quality materials, makes this enclosure a must-have for anyone who wants to combine performance and style.